Replacing Temp Sensor in Pro575

KYKY044

New member
Joined
Jun 28, 2019
Messages
4
Reaction score
1
Points
3
Location
Tacoma, WA
Grill
Pro 575
I recently purchased the pro575 and the temp sensor (thermocouple probe as they called it) was faulty and they had to send me a new one. They provided a very vague sheet of instructions in how to properly replace the sensor in the grill..

Has anyone replaced it in the new Pro575? I am just looking for a little more help or even a video if it exists.


I have attached what they sent me for reference. Thanks in advance.

493
 

Slgoss

New member
Joined
Jun 16, 2019
Messages
27
Reaction score
5
Points
3
Location
Brentwood, TN
Grill
Pro 575
I recently purchased the pro575 and the temp sensor (thermocouple probe as they called it) was faulty and they had to send me a new one. They provided a very vague sheet of instructions in how to properly replace the sensor in the grill..

Has anyone replaced it in the new Pro575? I am just looking for a little more help or even a video if it exists.


I have attached what they sent me for reference. Thanks in advance.

View attachment 493



I’m not sure if this is helpful but here is a video replacing the probe on the previous model.


If your replacing due to temp issues I’d make sure you are on the latest firmware before you begin reinstalling the new probe. The firmware should be 01.01.02
 

Latest Discussions

Top