Unit cycles off and on before set temp

Gary

Member
Joined
Mar 9, 2020
Messages
136
Reaction score
24
Points
18
Location
California
Grill
Pro 575
While doing a pizza at 450 the unit made it to 435 I put the pizza in and 25 minutes on the timer.
Getting towards the end around 6 minutes left the unit starts cycling off and on. Temperature drops to 420 then 410 it cycles back on for a short while builds temperature by maybe 10 degrees and does it again. This occurred several times.
Any suggestions or ideas??
Never made it to 450. And I do not have the latest firmware update.
 

primeone

Administrator
Staff member
Joined
Feb 12, 2019
Messages
741
Reaction score
226
Points
43
Location
Austin, TX
Grill
Ironwood 650
I would certainly try to get the grill connected to the internet it can be updated. I bet that fixes your issues.

Never made it to 450. And I do not have the latest firmware update.
 
OP
OP
Gary

Gary

Member
Joined
Mar 9, 2020
Messages
136
Reaction score
24
Points
18
Location
California
Grill
Pro 575
Have been connected to the internet for the last week and a half. Going on call #4 to Traeger as a supervisor is supposed to call and remedy my situation with the firmware update. The issue of not reaching temperature and shutting off and on is an entirely new situation
 
Top