Traeger Pellet Ramp - 3d Printed

[primeone]

Check out this 3d printed pellet ramp! This should make it easier to pour pellets back in the container. Download the 3d model here:
https://cults3d.com/en/3d-model/tool/traeger-pellet-ram

 

[GrillMeister]

Nice!

 

[dblcrona]

View attachment 2868

Check out this 3d printed pellet ramp! This should make it easier to pour pellets back in the container. Download the 3d model here:
https://cults3d.com/en/3d-model/tool/traeger-pellet-ram

Nice idea. I like that. I usually scoop pellets out one handful at a time because the pellet door as designed is as precise as a lawn sprinkler. I may have to print one of these.

 

[cmiller]

View attachment 2868

Check out this 3d printed pellet ramp! This should make it easier to pour pellets back in the container. Download the 3d model here:
https://cults3d.com/en/3d-model/tool/traeger-pellet-ram

Looking for this file and cannot find it. Not sure if the link is broken or not.

 

[tomrc276]

Ditto, cannot find the file for this print. Please re-publish. Would very much like to have this attachment to my TI850.

 

[KevinT]

View attachment 2868

Check out this 3d printed pellet ramp! This should make it easier to pour pellets back in the container. Download the 3d model here:
https://cults3d.com/en/3d-model/tool/traeger-pellet-ram

Our young Newfie would be so disappointed. She loves to scarf up the spilled pellets. ?

 

[dblcrona]

View attachment 2868

Check out this 3d printed pellet ramp! This should make it easier to pour pellets back in the container. Download the 3d model here:
https://cults3d.com/en/3d-model/tool/traeger-pellet-ram

Out of complete curiosity, what type of printer did you use? I assume it is fused deposition modeling (FDM).

 

[primeone]

Looking for this file and cannot find it. Not sure if the link is broken or not.

I never downloaded the file, was just passing along the information. I'll do some searching and see if I can find it again.

 

[CopperHead]

This seems like it would be very handy. I did some searching since we have a 3D printer at work and I believe this is it...

Pellet Smoker Ramp by Tman201

Simple design for a smoker to empty the pellets easier

www.thingiverse.com

 

[CopperHead]

File attached. Not my design. I found it on thingiverse.com.

 

[primeone]

This seems like it would be very handy. I did some searching since we have a 3D printer at work and I believe this is it...

Pellet Smoker Ramp by Tman201

Simple design for a smoker to empty the pellets easier

www.thingiverse.com

Great find and welcome to the site! Thanks for attaching the file as well.