Smoke Tube?

[Flatlander]

Hi. I have a Pro 575 and thoroughly enjoy using it. Before my Traeger I was doing my low and slows on a BGE and really liked the smoke flavor the wood chunks would produce. I'm still getting know my Traeger but the wood flavor, while acceptable, is not as strong as I would like. I've seen a few posts about using a smoke tube and would like to hear what folks think about incorporating these and any recommendations.

Thanks!

 

[GrillMeister]

I have used them and they do add smoke to the pit. I have both the AMAZ-N round tube and this flat edged one.

https://www.amazon.com/gp/product/B06ZZRR7XD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I prefer the flat edge one as it stays in place and does not roll.

 

[Flatlander]

I have used them and they do add smoke to the pit. I have both the AMAZ-N round tube and this flat edged one.

https://www.amazon.com/gp/product/B06ZZRR7XD/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I prefer the flat edge one as it stays in place and does not roll.

Thanks for the link. Do you think Ione of those butane torches used in the kitchen will work to light the tube?

 

[Flatlander]

Thanks for the link. Do you think Ione of those butane torches used in the kitchen will work to light the tube?

@GrillMeister - I just tried it on some loose pellets and they ignited just fine. I think this will work like a champ. Thanks again

 

[MaD HuNGaRIaN]

I smoke at 225º with Texas Beef pellets and find the smoke to be perfect. What temp / pellets are you using? I don't think you'd need a doodad like that in a 575.

 

[Timmy]

Well, i broke down and bought one, cant wait to try it out!

https://www.amazon.com/dp/B07JGVBKN3/ref=cm_sw_r_cp_apa_fabc_PPY8J85Y19VV8XP1AA22

 

[RustyJake]

Well, i broke down and bought one, cant wait to try it out!

https://www.amazon.com/dp/B07JGVBKN3/ref=cm_sw_r_cp_apa_fabc_PPY8J85Y19VV8XP1AA22

You will like what it brings to your cooks.
I have been using mine on all my long smokes, bacon and for cheese

 

[GrillMeister]

Well, i broke down and bought one, cant wait to try it out!

https://www.amazon.com/dp/B07JGVBKN3/ref=cm_sw_r_cp_apa_fabc_PPY8J85Y19VV8XP1AA22

So you went with the kit eh? Let me know if you are allowed to store in the kitchen like market. That's the one to get though. I won't roll.

 

[Slimpicker]

Well, i broke down and bought one, cant wait to try it out!

https://www.amazon.com/dp/B07JGVBKN3/ref=cm_sw_r_cp_apa_fabc_PPY8J85Y19VV8XP1AA22

That's the one I got... it works great.. but my Butane Torch took a CRAP on me, so I'm going back to propane

 

[GrillMeister]

That's the one I got... it works great.. but my Butane Torch took a CRAP on me, so I'm going back to propane

I use a MAPP torch. I've had one for over a decade and use it to start the lump charcoal for the ceramic cookers. It works great starting the smoker tubes. I've been using it to melt ice on locks and stuff this week too. The thing with MAPP torches is that they work upside down where propane won't. They burn hotter too. Plus, if you ever need to sweat some copper plumbing joints...

 

[Timmy]

I use a MAPP torch. I've had one for over a decade and use it to start the lump charcoal for the ceramic cookers. It works great starting the smoker tubes. I've been using it to melt ice on locks and stuff this week too. The thing with MAPP torches is that they work upside down where propane won't. They burn hotter too. Plus, if you ever need to sweat some copper plumbing joints...

View attachment 4214

Yep that is exactly what I have, works great for starting charcoal and my firepit.

 

[RustyJake]

I use this style for lighting my Kamado, so I am using it for the smoke tube as well
"Grill Torch Charcoal Starter – Dickson Barbeque Centre" https://dicksonbbq.com/products/grill-torch-charcoal-starter?_pos=6&_sid=9d1b6a04a&_ss=r

 

[Timmy]

So you went with the kit eh? Let me know if you are allowed to store in the kitchen like market. That's the one to get though. I won't roll.

View attachment 4213

The only time it will see the inside of the house is if is being washed. So no worries. Lol

 

[Timmy]

I use this style for lighting my Komado, so I am using it for the smoke tube as well
"Grill Torch Charcoal Starter – Dickson Barbeque Centre" https://dicksonbbq.com/products/grill-torch-charcoal-starter?_pos=6&_sid=9d1b6a04a&_ss=r

DUDE, THATS AN AWESOME FLAME THROWER!!

 

[Slimpicker]

I use a MAPP torch. I've had one for over a decade and use it to start the lump charcoal for the ceramic cookers. It works great starting the smoker tubes. I've been using it to melt ice on locks and stuff this week too. The thing with MAPP torches is that they work upside down where propane won't. They burn hotter too. Plus, if you ever need to sweat some copper plumbing joints...

View attachment 4214

YES sorry but this is the one I was getting AGAIN anyway... MAPP not propane, it was just easier to type propane cuz it was in my head...
I have taken all my burners to the hunting cabin and left them there... (firestarters)... 2 years in a row, you'd think I'd learn.
I also have Acetylene and tip, but that's on the job way up north...

Plus, if you ever need to sweat some copper plumbing joints...

and that's what I bought them for, but the cabin is 105 minutes away and I'll just buy a new one and charge it to the job