rlaverda
Member
It seems that it's taking longer & longer to ignite (20-30 min with door closed). I stir the pellets frequently until finally they start smoking. Emptied & put in fresh pellets & made sure the hot box is clean. Any suggestions?
PRO 575 Average Time in Ignition Phase?
- Thread starter rlaverda
- Start date
Gary
Active member
Do you prime your fire pot with the auger??
Are your pellets damp?
My usual is within 3 to 5 minutes
Are your pellets damp?
My usual is within 3 to 5 minutes
rlaverda
Member
yes and no (using fresh pellets, not damp).
davwhite
Well-known member
Mine will take anywhere between 7 - 15 mins to reach cooking temp. depending on ambient temperature.
The damp pellets is something that got me with my Pro22. I had them in an outside shed but became damp, you will see a colour change in the pellet.
I never empty my pellets in the auger, I vac out what I can see and leave the rest. If you are cleaning them out they will have to take a while to reach the burner. I start with the lid open until smoke is pouring out then I close. The ignition process is a lot better than the Pro22.
The damp pellets is something that got me with my Pro22. I had them in an outside shed but became damp, you will see a colour change in the pellet.
I never empty my pellets in the auger, I vac out what I can see and leave the rest. If you are cleaning them out they will have to take a while to reach the burner. I start with the lid open until smoke is pouring out then I close. The ignition process is a lot better than the Pro22.
Traeger Photos
Traeger Photos
