Lid Finish

BA_Ga

Member
Joined
Dec 6, 2019
Messages
66
Reaction score
43
Points
18
Location
Thomasville, GA
Grill
Traeger Pro 34
The attached photo shows an issue I see on the lid of my Pro 34. When I first saw it, I thought it might be a line from a permanent marker. I used some cleanser, but it didn't change. Looking at it from different angles, it's obvious it's on the lid and under the final top coat of finish.

Do you folks see this as a real issue?
 

Attachments

  • Traeger_Finish_Issue1.jpg
    Traeger_Finish_Issue1.jpg
    194.3 KB · Views: 63
No issue unless it is a brand new Traeger. If it was mine, I'd be complaining about to support considering the amount of money I've spent on it.

Their QC should have spotted this before leaving the factory and they failed.
 
The attached photo shows an issue I see on the lid of my Pro 34. When I first saw it, I thought it might be a line from a permanent marker. I used some cleanser, but it didn't change. Looking at it from different angles, it's obvious it's on the lid and under the final top coat of finish.

Do you folks see this as a real issue?
Ya that’s odd for sure.
 
Thanks, guys. I submitted a report to Traeger, but wanted some input from you folks to know if I'm just being too picky! :)
 
Thanks, guys. I submitted a report to Traeger, but wanted some input from you folks to know if I'm just being too picky! :)
Nope not picky at all. Don’t blame you and I would do the same.
 
Back
Top