Camp Chef Wi-Fi controller on Pro 34

[dcn312]

Hi all,
I’ve been trying to add a Wi-Fi controller on my pro 34 for a while.
I found this controller on Amazon and noted one reviewer had installed this controller on a different brand smoker with similar plug/cable setup so I gave it a shot.
I also had to replace the RTD probe as the pin is different on this controller.
Someone also designed a 3D printed mount so that no metal cutting required. I had a friend print it for me. Works well.
Working good so far! Although Wi-Fi setup on this took me a bit of time, I got it working.
Now I can control via Wi-Fi and view meat probe temps on the app.
Controller: https://www.amazon.com/dp/B093PXFVNG?psc=1&ref=ppx_yo2ov_dt_b_product_details
RTD probe: https://www.amazon.com/dp/B08M9Q8CBP?psc=1&ref=ppx_yo2ov_dt_b_product_details
3D mount: https://www.thingiverse.com/thing:5471672

All the best and love this forum!

 

[Slimpicker]

 

[Foofoomeathead]

Hi all,
I’ve been trying to add a Wi-Fi controller on my pro 34 for a while.
I found this controller on Amazon and noted one reviewer had installed this controller on a different brand smoker with similar plug/cable setup so I gave it a shot.
I also had to replace the RTD probe as the pin is different on this controller.
Someone also designed a 3D printed mount so that no metal cutting required. I had a friend print it for me. Works well.
Working good so far! Although Wi-Fi setup on this took me a bit of time, I got it working.
Now I can control via Wi-Fi and view meat probe temps on the app.
Controller: https://www.amazon.com/dp/B093PXFVNG?psc=1&ref=ppx_yo2ov_dt_b_product_details
RTD probe: https://www.amazon.com/dp/B08M9Q8CBP?psc=1&ref=ppx_yo2ov_dt_b_product_details
3D mount: https://www.thingiverse.com/thing:5471672

All the best and love this forum!

Got any guidance on wiring gonna try it on an older unit.

 

[yonkerss]

How has your WiFi controller been working?

Ran across your thread from about a year ago and planning on doing this on my pro34. Wanted to check and see how yours was working.

Any advice / info would be great. Any wiring modifications needed or is it plug and play so that if I don't like it and want to go back to old controller I could.

 

[E07015]

Hi all,
I’ve been trying to add a Wi-Fi controller on my pro 34 for a while.
I found this controller on Amazon and noted one reviewer had installed this controller on a different brand smoker with similar plug/cable setup so I gave it a shot.
I also had to replace the RTD probe as the pin is different on this controller.
Someone also designed a 3D printed mount so that no metal cutting required. I had a friend print it for me. Works well.
Working good so far! Although Wi-Fi setup on this took me a bit of time, I got it working.
Now I can control via Wi-Fi and view meat probe temps on the app.
Controller: https://www.amazon.com/dp/B093PXFVNG?psc=1&ref=ppx_yo2ov_dt_b_product_details
RTD probe: https://www.amazon.com/dp/B08M9Q8CBP?psc=1&ref=ppx_yo2ov_dt_b_product_details
3D mount: https://www.thingiverse.com/thing:5471672

All the best and love this forum!

I just used the same mount to add one to my 34. Looks good! Thanks