Search results

  1. R

    Pellets Pellet Storage Solutions

    After shut down (15-25 min depending on what your cook temperature was). Don't stick your hand in the hopper while the grill is on or in shutdown mode, the auger could be spinning.
  2. R

    Pellets Pellet Storage Solutions

    Search around the site, this has been discussed more times than I can count. Yes, I empty pellets after each cook. Easy insurance to prevent auger jams, low temps, ignition issues. I store them in 5 gallon buckets with weather tight, screw-on lid. Buckets stay in my garage. Many people...
  3. R

    Mice Getting Into Pro 780

    Nothing in the hopper (so far). I empty after each cook and I am not sure a mouse could lift the hopper lid with the weight of the weather cover on top of it (also goes on after each cook). I have some spare sheet steel still, I may upgrade the wood plug to some sort of a metal door but the...
  4. R

    Mice Getting Into Pro 780

    I have been having issues with mice getting into my Pro 780 to feed on any little bits of grease/scraps that didn't get cleaned out. At first it was evident they were getting in through the grease drain so I removed the bucket after each cook. They were still getting in. Then I noticed they...
  5. IMG_3656.jpg

    IMG_3656.jpg

  6. IMG_3655.jpg

    IMG_3655.jpg

  7. R

    eero dual band mesh router and WiFire

    I am so happy Eero finally decided to make this a feature within the app. I was getting tired of calling tech support to turn off my 5 GHz every time I had to set up a new home automation device.
  8. R

    Ignite button weirdness

    Mine is squishy too. Just want to make sure that you are are doing the correct startup procedure because this tripped me up a few times when I first started using it: turn dial to desired temp > press dial knob in to lock temp > press ignite button. If you are following this procedure you may...
  9. R

    Rusty Baffle

    One thing that has helped stop the rust on my baffle was to season it a few cooks in a row with canola oil prior to putting liner in place. I had to take a wire brush on my drill to get all of the old rust off but then oiled it and did a cook. When I cleaned the grill out it had a nice...
  10. R

    Don't like my 575 for Pizza at all

    Remove the drip tray, use a pizza stone, cook it at 450 for 15-18 mins. We do fresh pizza every Friday and comes out great. Never tried frozen pizza so can't comment on that. Have the pizza stone in the grill during the preheat so that it is gradually brought up to temperature otherwise you...
  11. R

    Thermocouple protector for sale

    It was all just raw sheet steel. I cut, bent, drilled, filed, seasoned everything. Figured the drill holes in the side will aid in air circulation and reduce the amount of heat retained and in turn "felt" by the thermocouple. Although, thinking about it, having something that retains heat...
  12. R

    Thermocouple protector for sale

    I built this thermocouple protector for my Pro780 after damaging the original and waiting 3 months for the replacement to come in. It is made from bare sheet steel and seasoned to inhibit rust. Given the poor location of the very fragile thermocouple on some of these models would anyone be...
  13. R

    Temp issues Pro 780

    Is it just always 30 deg low or does it swing up and down?
  14. R

    Pro 575 consistently goes over set temp

    Still waiting on the replacement thermocouple BTW. It’s been 6 weeks and still don’t know when I’ll get one. Thankfully this one still works.
  15. R

    Pro 575 consistently goes over set temp

    Here’s my version, ain’t perfect but it works and didn’t cost me anything.
  16. 55EB7D30-4BA2-4913-B8D7-CA6A93DC2501.jpeg

    55EB7D30-4BA2-4913-B8D7-CA6A93DC2501.jpeg

  17. R

    Pro 575 consistently goes over set temp

    Have you had a chance to grab a picture? Looking to make one myself which will go on my replacement thermocouple, if it ever arrives.
  18. R

    Standby Mode (Ironwood 885)

    Correct, display does not need to be on, just have the toggle switch "on" in the back.
  19. R

    Pallet Change Chute

    Brilliant, I’m gonna make one up. Thanks for sharing
  20. R

    Pallet Change Chute

    What’s that material? Looks like it works perfect BTW, well done.
Back
Top